Night Light Setup

Our lamps use WLED to come to life. With the WLED app, you can control color, brightness, effects as well as set presets and sync with other WLED-based lights.

To set up your night light, please download the WLED app from the Apple App Store or Google Play Store. Next, connect to the AM-NightLight WiFi network with your phone or other WiFi-enabled device (passcode matter1234). Your phone may ask you to sign in and direct you to the WLED setup page. If it doesn't, please open a browser and navigate to http://4.3.2.1

Choose WiFi Setup and tap Scan so the light can find your WiFi network. After it scans, select your WiFi network from the list and enter your network's passcode. Tap Save & Connect then connect your phone or other WiFi-enabled device to the same network you just selected.

Next, go to the WLED app you installed earlier and tap the plus icon at the top right to add your light. Select Discover Lights and your light should be automatically found. Tap the check at the top right to finish adding your light and return to the list of lights.

From this list, you can perform simple actions such as turning on and off your light and adjusting the brightness. For more advanced actions, tap the name of the light. You can now use the app to set a specific color or use a palette of colors. You can also go to the Effects tab for special lighting effects. Finally, if you are happy with a color or effect you've selected, you can save it as a preset.

If you have multiple Altered Matter night lights or other WLED-based lights, you can synchronize them to display the same color or effect. To do so, tap the Sync button on the light you wish to control the others. As long as they are on the same WiFi network, you can restart the other lights and they will begin syncing automatically.